Information security signs for administrative buildings

 
 The graphic layout of the tablet is developed on a computer. The layout is prepared for printing on a wide-format printer and printed on PVC film with an adhesive base. The finished printed product on PVC film is laminated on a transparent film using a laminator. After lamination, the film is rolled onto a PVC plate 3-5 mm thick. With the use of sectional knives and rulers, the table is cut and prepared for the presentation. On the back of the plate is mounted 2-sided mounting tape for fixing on any surface. The plate is packaged in a stretch film using corrugated cardboard.
 
 FIRE SAFETY SIGNS
 

Fire safety signs are used to designate fire fighting equipment, primary fire extinguishing equipment, and water sources. Also signs on fire safety are used to designate TSPPZ (technical means of fire protection). When making fire safety signs & nbsp; film materials are used. Fire safety signs are made in the climatic version of UHL according to GOST 15150. Flat two-sided fire safety signs are mechanically durable and waterproof. Fire safety signs are heat and cold resistant. Flat unilateral signs of fire safety are made of self-adhesive and in quality are not inferior to the requirements of GOST 20477 for polyethylene tapes with a sticky layer. Materials for making fire safety signs have electrostatic properties that exclude or prevent the occurrence of static electricity discharges that can become a source of ignition or explosion in accordance with GOST 12.1.018. Fire safety signs based on self-adhesive materials are placed in a polyethylene package to avoid shrinking and drying.

EVACUATION SIGNS

Evacuation routes and exits provide safe, forced evacuation of all people in a building, regardless of their age, mental state or health. Evacuation safety signs are intended to indicate the direction of movement during evacuation. Signs are made according to STB 1392-2003 and GOST 12.4.026-76 “System of fire safety standards. Signal colors. Signs of fire safety ". In the manufacture of evacuation marks used film materials. The standard size is 150x150 mm (by agreement it is possible to manufacture other sizes of the mark).

FORBIDDING SIGNS

Prohibition signs are used when there is a risk of fire from the use of open fire or smoking. It is used on the outer side of warehouse doors with flammable and explosive materials and substances inside these warehouses; at the entrance to the areas where they work with the specified materials and substances; on equipment representing a danger of explosion or fire. Signs are made according to STB 1392-2003 and GOST 12.4.026-76 “System of fire safety standards. Signal colors. Signs of fire safety ". In the manufacture of evacuation marks used film materials. The standard size is 150x150mm (by agreement it is possible to manufacture other sizes of the mark).

PRESCRIBING SIGNS

Mandatory signs are intended to permit workers to perform certain actions only when specific labor safety requirements specified on the sign are met (mandatory use of protective equipment, taking measures to ensure occupational safety and other actions). Signs are made according to STB 1392-2003 and GOST 12.4.026-76 “System of fire safety standards. Signal colors. Signs of fire safety ". When making prescriptive signs film materials are used. The standard size is 150x150mm (by agreement it is possible to manufacture other sizes of the mark).

WARNING SIGNS

Warning Signs — Warns of a hazard, an obstacle, or a change in road conditions. You can guess the danger by the picture shown on the sign. In the manufacture of warning signs used film materials. The standard size is 150x150mm (by agreement it is possible to manufacture other sizes of the mark).

SIGNS AND POSTERS FOR ELECTRICAL SECURITY

Electrical safety signs and posters - should be used to prohibit actions with switching devices, which, if mistakenly turned on, can be energized at the place of work; for movement without protective equipment in the switchgear 330 kV and above with an electric field strength above 15 kV / m; for warning about the danger of approaching live electrical parts; to allow certain actions only when specific labor safety requirements are met; to indicate the location of various objects and devices. Permanent posters and electrical safety signs are made of electrical insulating materials (PVC, fiberglass). Standard ra